Have any question? Call Us Now!!  Whatsapp :+86 132 6090 6540 

86-25-52251179

Yunjin Road Jianye District

Rm 1529-1531, Bldg 1
EnglishEnglish

PRODUCT DETAILS

You are here: Home » Products » Linear Guides » TBI » TBI TM Linear Guide TM12WN Linear Block TM12WNS-N-Z0

loading

Share to:
sharethis sharing button

TBI TM Linear Guide TM12WN Linear Block TM12WNS-N-Z0

1. Block type:  Mini type
2. Dimension: 12
3. Width of rail: Width
4. Length of block: Standard type
5. Material: Stainless steel
6. Quantity of block: Mark 1 when there is only 1 runner block
7. Accessory code: Standard (include end seal with side Seal)
8. Accuracy Grade: Normal
9.  Preload: Z0 (No preload)
10. Two sets per axis: II (no need to be mared when there is only one rail)
11. Rail special machining: K (Tapped-hole rail), X (Rail with special machining)
 
 
Availability:
Quantity:
  • TM12WN

  • TBI

  • TM12WNS-N-Z0

Dust-Poof Design
The stainless bottom seal is the innovative new design of TBI Motion TM series. It prevents effectively the abnormal chips getting into the ball track from the bottom side of the block and keep the good running performance and extend the life time of the slider because the friction is low by keeping some small backlash between the slider and rail. Standard end seals provide extreme protection from dust. Metal scrapers to maintain ling service life and lower maintenance period. Unique low friction seal lips provide best smoothness and lower friction.


High Tensile Performance Stainless Steel Reinforcement Plate
High Tensile Performance Stainless Steel Reinforcement Plate Dual fully covered stainless steel plates design delivers the best coverage for plastic on each ends. Stainless steel screws are used to strength the rigidity, protection with end cap in order to sustain higher operational speed Vmax = 5 m/s², αmax= 300 m/s², When linear block is equipped with reinforcement plates and Dust-proof seal, it can also function as scraper.

High Loading and Moment Capacity Performance
TM Miniature Linear Guide series uses two row re-circulating methods with Gothic 45° contact angle on the rail groove to achieve equal load capacity in four directions. Larger steel balls are used to enhance the loading and torsion resistance performance in limited space.


Application
3D Printing, Industrial machinery, Electronic application, Semi-conductor industries etc.


Please noted that the first hole of rails (E dimensions will be the same at both ends unless otherwise specified in the purchase order). Also for the rails accuracy we have N (Normal), H (high), P(High precision) in stock, for the accuracy details, please kindly check within next page of Pdf file (G-Interchangeable-Accuracy-Grade).

TBI-TM


Item #

TM12WN

Series
TM series
Block Type
Miniature type with End seal and slide sea
Model Size
12 mm
Load Type
Light load of Z0
Block Mounting
Mounting from Top
Block
Standard width type block

Preload Class

ZF- Slight clearance  ,

Z0- No Preload

Z1- Light Preload


Precision code

N (normall)

Dust Protection

Standard preotection (End seal and bottom seal



TBIMOTION_TM-W type linear guide

  • Grease

When a linear guide is well lubricated, the contact point between rail and rolling steel balls will be  separated by 1 micro meter. Therefore, a good lubrication increases the service life of linear guide.


  • Clean room Lubrication


Suitable for low contamination environment.

  • Lubrication

General usage, ISO V32~68.

Lubrication png

Model Lubrication   amount (cc) Model Lubrication   amount (cc)
TM07MN

0.3



TM07NL

0.4


TM09MN
0.4
TM09WN
0.4
TM09NL
0.6
TM09WL
0.6
TM12MN
0.9
TM12WN
0.9
TM12NL
1.3
TM12WL
1.3
TM15MN
1.4
TM15WN
1.4
TM15NL

2

TM15WL
2


TM12WN
01

 Single color box of original


02

 Suitable carton size


03

Carton box for rail


05

  Remark:

   For the large quantity of the rail or linear carriage, We will package them with        wooden box before shipment.


Previous: 
Next: 

CATEGORY

Have any Question ?
Call Us :

86-25-68021803

For Details

We Can Locate Any Major Brand or Type of Bearing needed for just about any type of application.

QUICK LINKS

PRODUCTS CATEGORY

CONTACT US

   Rm 1529-1531, Bldg 1,Yunjin Rd, Jianye Dist, Nanjing, Jiangsu, China
    Phone : 86-25-52251179
    E-mail : sales@njskt.com
    8:30am - 5:30pm  Sunday Closed

Copyright  2019  Nanjing ShengKaiTe Bearing Co., Ltd.  Sitemap